Bantape® 3025CW/R nominal 30 micron (1.2 mil) high tensile strength aluminum foil backing, combined with a cold weather flame retardant acrylic adhesive, protected by an easy release silicone release paper. The workable foil applies easily to both fibrous and sheet metal ducts and conforms to irregular surfaces.
Features
Aluminum backing provides excellent reflection of both heat and light.
Cold weather adhesive with moderate adhesion offers good sealing and bonding on
Good aging resistance both indoors and outdoors.
Low moisture vapor transmission rate offers excellent sealing and patching performance.
IMO Resolution MSC 61(67) Annex 1 Part 5 and Annex 2 IMO Resolution MSC 61(67) Annex 1 Part 2 and Annex 2
UL 723 Listed (Flame/Smoke Rating)
Description
Bantape® 3025CW/R nominal 30 micron (1.2 mil) high tensile strength aluminum foil backing, combined with a cold weather flame retardant acrylic adhesive, protected by an easyrelease silicone release paper. The workable foil applies easily to both fibrous and sheet metal ducts and conforms to irregular surfaces.
Bantape® 3025CW/R excels in demanding temperature and humidity applications and provides superior performance and durability over a wide range of environmental conditions.
Product Use
HVAC industry for joining and sealing Foil-Scrim-Kraft Facing laminated fiberglass blanket / duct board joints and seams; joining and sealing flexible air duct seams and connections. General purpose holding, patching, sealing and masking applications – indoors and outdoors
Cut Roll: 75mm (3”) / 100mm (4”)
Log Roll: 1200mm x 45 / 50m
Jumbo Roll: 1200mm x 1000m / 1200m / 1350m
IMPORTANT NOTE
1. The data above are typical values only, and should not be used for specifications purpose.
2. Tolerance: Weight and Thickness: ±10%; Width: ±3mm; Length: Cut Roll: ±0.3m, Jumbo Roll ±0.5%
